MarkBass Little Mark IV Ninja 1000W MPT Power Amp Bass Head MBH110104
LITTLE MARK IV NINJA
Product code: MBH110104Z
The LITTLE MARK IV NINJA first and foremost respects the priority of tone that has driven the worldwide success of our top-seller head Little Mark Ninja Richard Bona signature. The new release is upgraded with the new features of the Little Mark IV like: the updated 4 band EQ, the Old School filter, the 3-way rotary switch, the new bi-band limiter and powered by our astounding 1000W MPT power amp. It gives a massive amount of power, exceptionally clear and dynamic, and performs flawlessly thanks to the cutting-edge Mark Proprietary Technology!
> MARK OF NINJA
The Little Mark IV Ninja sound is warm and natural and respects the tone of your instrument without compromise, perfectly aligned with the vision of Richard Bona and Marco De Virgiliis.
> UPDATED 4 BAND EQ, OLD SCHOOL FILTER, 3 WAY SWITCH
Our updated 4 band EQ section features very effective controls allowing you to easily find the sound you want, boosting or cutting up to 16dB for each of the 4 bands to cover all the tonal nuances needed in any genre of music. Additionally the Old School filter cuts your high
frequencies and gives a round and smooth tone. The 3 way rotary-switch allows you to choose between a super-balanced flat tone, a
scooped preset that drops the mids while boosting the lows and highs – giving a superb slap sound, or lastly the ‘FSW’ option to control both mute and the Scooped EQ on demand by connecting an optional dual footswitch.
> 1000W high-power / ultimate dynamics
This high-power head gets amplified by a potent 1000W MPT power amp. The Little Mark IV Ninja boasts large supply of power and
serious headroom with exceptionally clear sound and ultimate dynamics at any volume you play!
> BI-BAND LIMITER
Our new bi-band limiter responds faster and more dynamically to your playing than traditional limiters do and lets your high end “breathe” for a more natural sound. It makes our amp heads the best choice for anyone who enjoys a quick, punchy attack at high volumes.
> MUTE / LINE OUT LEVEL CONTROL / PRE-POST EQ SWITCH
Featured on the front panel of the Little Mark IV series amps are a convenient mute switch, along with the Line Out level control knob that
allows for precise control of the signal sent to the mixer/ PA. On the rear panel is a Pre-Post EQ switch allowing you to set the XLR output’s routing to before or after your EQ as required.
> MPT – MARK PROPRIETARY TECHNOLOGY
Many other bass amps on the market use power amps that are not specifically designed for bass. At Markbass, Marco De Virgiliis invested heavily in R&D to develop proprietary power amp technology in house. Our MPT power amp was built from the ground up to respect and elevate the inherent tone of your instrument.
Minimum ohm load for all Markbass heads is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
Rack ears do not come included with this head.
Product specifications are subject to change without notice.
impedance: 1 Mohm, max. voltage: 9 Vpp RETURN impedance: 22 Kohm, max. voltage: 10 Vpp
GAIN –46 dB to +23 dB range
LINE OUT level control on front panel
PRE/POST EQ (for line out) switch on rear panel
GROUND LIFT switch on rear panel
LOW: center frequency 68 Hz; level: ±16 dB
MID LOW: center frequency 360 Hz; level: ±16 dB
MID HIGH: center frequency 800 Hz; level: ±16 dB
HIGH: center frequency 10 kHz; level: ±16 dB
OLD SCHOOL: max cut range: 250 Hz – 20 kHz
3 WAY ROTARY SWITCH: flat/scooped-mid/FSW
SEND EFFECTS: unbalanced, max. voltage 20 Vpp
TUNER OUT: unbalanced, max. voltage 2 Vpp
LINE OUT balanced XLR, max. voltage 20 Vpp
SPEAKER OUT: speakon
DIMENSIONS AND WEIGHT
HEIGHT: 2 rack units (3.27 in. / 83 mm)
WIDTH: 10.87 in. / 27.6 cm (19 in. / 48.3 cm with optional rack ears)
DEPTH: 9.84 in. / 25 cm
WEIGHT: 6.17 lbs / 2.8 kg
FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID
OUTPUT POWER: 1000W RMS @ 4 ohm, 600W RMS @ 8 ohm
POWER REQUIREMENT: 100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale)
There are no reviews yet.