Tama HC72WN Roadpro Series Straight Cymbal Stand

Tama HC72WN Roadpro Series Straight Cymbal Stand

Tama
Availability:

Out of stock

Buy at www.musicianscart.com Tama HC72WN Roadpro Series Straight Cymbal Stand ,28.6mm diameter base section tubing, Double braced legs,Quick-set tilter,Quick-set cymbal mate.

₹5,998

Out of stock

Tama HC72WN Roadpro Series Straight Cymbal Stand

Roadpro Straight Cymbal Stand
HC72WN

Details:

•28.6mm diameter base section tubing
•Double braced legs
•Quick-set tilter
•Quick-set cymbal mate
Features
 

 

 
Quick-Set Tilter (US. PAT.NO.7385127)
The toothless Quick-Set Tilter securely holds its position using the friction of six metal disc plates instead of traditional gears, so you can adjust it to any desired angle. This mechanism also has a more durable structure than a conventional gear tilter.

 

 
Quick-Set Cymbal Mate (US. PAT.No.7629526)
By simply gripping and pressing the two buttons on the sides of the unit, users can attach and remove the Cymbal Mate with just one touch.
This makes setting up cymbals a snap. Of course, as is the case with an ordinary Cymbal Mate, its easy to make fine adjustments to cymbal swing by rotating the unit.

 

 
Reversible Bottom (US. PAT.NO.6239343)
The cymbal bottom protects the cymbals center hole from the tilters shaft and threads. If part of the nylon sleeve wears out, you can continue to use the cymbal bottom by turning it upside down.

 

 
Nylon Washers
By inserting nylon washers into the leg stand joints we have improved durability and made the leg action much smoother!

 

 
Noiseless Design (US. PAT.NO.6454483)
Are cymbal stands just for supporting cymbals? We think cymbal stands are also musical instruments. All TAMA cymbal stands in the Roadpro and Stage Master lineups were designed with the elimination of stand noise a top priority. A special rubber cap (A) at the end of the upper tube eliminates swaying and rattling, and a special nylon sleeve (B) underneath the die-cast joint of the base section further reduces swaying.
Die-cast Joint
You loosen and tighten the T-bolt/nut of the die-cast joint every time you change the height of the cymbal, making the T-bolt/nut one of the hardest-working parts. At each die-cast joint, the T-nut/bolt is combined with a pressure plate and Nylon Bushing. With this design, removing and replacing a worn bolt or bushing is fast and easy.

 

 
Steel Insert Nut
Placing a threaded steel insert nut inside the tripod base provides much more strength and makes stripping much less likely than with the traditional method of cutting the threads directly into the die-cast section.
SKU: HC72WN Category:
Weight 1 kg
Brand

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In

You may also like…

Related products

Brands Carousel